Installing an T-5 Manual Transmission in a 65 Fastback |
|
While prepping for the engine reinstall, ..... |
|
| Transmission Selection: | |
| These radiators come in a standard 19" height, but in several different widths and different outlet locations. |
|
Flywheel: |
|
The lower mounts were made from 1/8" steel, folded to form a left and right cradle. Tilling is required. |
|
| Clutch/Pressure Place setup: | |
| Wiring is standard setup.... | |
| Clutch Cable: | |
|
How's this for clearance. |
|
| Crossmember: | |
| Although not necessary to install the new tank, changing over to a | |
| Shifter: | |
| Although not necessary to install the new tank, changing over to a | |
| Drive Shaft: | |
| Although not necessary to install the new tank, changing over to a | |
|
Questions? Email me. |
|
| 20 August 2002 | |